Arduino UNO Shield - IN-8-2 Nixie Tube Clock – NO Nixie
USD $75.00
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
This is a nixie tube display that interfaces with an
Arduino UNO computer board.
This board (also called a shield) uses a single IN-8-2 nixie tube which is NOT INCLUDED.
The board was designed with the intent of creating a single-tube nixie clock but could be used for any other application needing a digital display.
Caution – Nixie tubes are not low voltage devices like LEDs.
They operate at elevated voltages that pose a shock hazard.
Because of the operating characteristics of the IN-8-2 nixie tube, this board has voltages of 175 volts DC and 200 volts AC.
If you are not comfortable and/or experienced with the safety measures required at such voltages, then this product is probably not for you.
The board requires a power input of 12 volts AC (NOT DC).
A suitable plug-in 12-volt AC adapter from Jameco Electronics (#2179614) is NOT INCLUDED.
On-board power supply circuitry provides 8 volts DC to power the UNO and 175 volts DC power for the nixie tube.
The DC input connector on the UNO board cannot be used.
There is also an on-board 60 Hz signal that provides accurate timing via UNO input 2 (Interrupt INT0).
The IN-8-2 nixie digits are 17mm high (.708”) with distinctive “2” and “5” digits (“5” is not an upside down “2”).
It is bright and easily visible form across a room.
There is also a right-hand decimal point.
Two push buttons and a slide switch are intended for clock setting purposes – see photos.
Board size: 3.2” x 3.5”
Buyer will receive:
- The nixie display board
(The Nixie tube, the 12-volt AC power adapter, and the UNO board are NOT included).
- Hardware and instructions for mating to an Arduino UNO.
- Notes on programming.
- Full schematic diagram.
Designed and made in the USA.
Warning, this device contains voltages that pose a shock hazard. Those that purchase and use this board, do so at their own risk.
USPS Shipping to U.S. only (no international shipping)
Buyers may request, at no charge, my UNO program that will create a single-tube nixie clock using this board and an Arduino UNO processor.
NOTE: I may have remaining listings on eBay this same board with both the Nixie Tube and the 12-volt AC power adapter included.
This board (also called a shield) uses a single IN-8-2 nixie tube which is NOT INCLUDED.
The board was designed with the intent of creating a single-tube nixie clock but could be used for any other application needing a digital display.
Caution – Nixie tubes are not low voltage devices like LEDs.
They operate at elevated voltages that pose a shock hazard.
Because of the operating characteristics of the IN-8-2 nixie tube, this board has voltages of 175 volts DC and 200 volts AC.
If you are not comfortable and/or experienced with the safety measures required at such voltages, then this product is probably not for you.
The board requires a power input of 12 volts AC (NOT DC).
A suitable plug-in 12-volt AC adapter from Jameco Electronics (#2179614) is NOT INCLUDED.
On-board power supply circuitry provides 8 volts DC to power the UNO and 175 volts DC power for the nixie tube.
The DC input connector on the UNO board cannot be used.
There is also an on-board 60 Hz signal that provides accurate timing via UNO input 2 (Interrupt INT0).
The IN-8-2 nixie digits are 17mm high (.708”) with distinctive “2” and “5” digits (“5” is not an upside down “2”).
It is bright and easily visible form across a room.
There is also a right-hand decimal point.
Two push buttons and a slide switch are intended for clock setting purposes – see photos.
Board size: 3.2” x 3.5”
Buyer will receive:
- The nixie display board
(The Nixie tube, the 12-volt AC power adapter, and the UNO board are NOT included).
- Hardware and instructions for mating to an Arduino UNO.
- Notes on programming.
- Full schematic diagram.
Designed and made in the USA.
Warning, this device contains voltages that pose a shock hazard. Those that purchase and use this board, do so at their own risk.
USPS Shipping to U.S. only (no international shipping)
Buyers may request, at no charge, my UNO program that will create a single-tube nixie clock using this board and an Arduino UNO processor.
NOTE: I may have remaining listings on eBay this same board with both the Nixie Tube and the 12-volt AC power adapter included.
Returns Accepted for this item if it's within 30 Days
Price type
IN STOCK
OUT STOCK
.
